Produit ajouté au panier

Guide de Lumière à Deux Bras, ¼" x 48"

×
Sélection des spécifications
Diamètre Fibre (pouces):
Longueur (pouces):
Stock #53-045 3-4 jours
×
Quantity Selector - Use the plus and minus buttons to adjust the quantity. +
€280,00
Qté 1+
€280,00
Prix sur Quantité
Demande de Devis
Les prix sont indiqués hors TVA et droits applicables.
Remarque : Des accessoires sont nécessaires pour toute utilisation. | En savoir plus

Caractéristiques du produit

Fraction d'Emballage (%):
82.00
Type d'Éclairage:
Fiber Optic Light Guide
Adaptateur de Guide Lumineux Compatible:
SX: #38-944
MX: #66-905
Géométrie:
Spot Light

Propriétés physiques et mécaniques

Rayon de Courbure Min. (mm):
38.1
Diamètre Fibre (pouces):
0.250/0.177 (Ø1/Ø2)
Longueur (pouces):
48.00
Tolérance Longueur (pouces):
± 0.5

Propriétés optiques

Angle d'Acceptation (°):
68.00
Ouverture Numérique NA:
0.55
Diamètre Fibre (μm):
50.00
Indice du Coeur (nd):
1.581
Indice de Réfraction (nd):
1.487
Pertes de Transmission:
6% per foot at 600nm
Gamme de Longeur d'Onde (nm):
400 - 2000

Environnement & durabilité

Température d'Utilisation (°C):
-40 to +107

Conformité réglementaire

Reach 174:
RoHS:
Non Conforme
Certificate of Conformance:

Produits

 Diamètre Fibre (pouces)   Longueur (pouces)   Comparer  Numéro de Stock  Prix Achat
0.125/0.089 (Ø1/Ø2) 36.00
0.250/0.177 (Ø1/Ø2) 36.00
0.250/0.177 (Ø1/Ø2) 48.00

En savoir plus

Light Guide Adapters are required to mate the low profile Fiber Optic Line Lights with fiber optic illuminators.
  • Efficacité de couplage d'illuminateur typiquement de 70%
  • Éclairage froid et uniforme
  • Terminaisons serties en acier inoxydable
  • Fibres de verre rectifiées et polies

Les Guides de Lumière Double Branche sont des fibres de verre polies et mises à la terre à entrée unique et à double sortie qui sont conçues pour diviser la sortie d'une source d'illuminateur unique. Les guides ont des terminaisons en acier inoxydable serties dans une gaine de protection. Ils se caractérisent par une efficacité de couplage de l'illuminateur de 70% et fournissent un éclairage froid et uniforme. Les Guides de Lumière Double Branche nécessitent un adaptateur qui dépend du diamètre de l'embout pour se connecter aux illuminateurs à fibre optique.

Remarque : Pour les diamètres de fibre de 1/8", utilisez le #38-943, et pour ¼", utilisez le #38-944.

Accessoires

Titre ComparerNuméro de Stock  Prix Achat
Adaptateur Fibre Optique SX-6, DI de 0,316" #38-944 €46,00   Demande de Devis
  • 3-4 jours
    ×
Adaptateur Fibre Optique MX-6, 0,316" #66-905 €40,00   Demande de Devis
  • 3-4 jours
    ×

Informations Techniques

 
Fiber Bundle Diameter Length Dimensions Dual Branch Guides Stock No.
Ø1 Ø2 A B C
0.125" 0.089" 36" 0.187" 0.250" 0.230" #54-199
0.250" 0.177" 36" 0.312" 0.422" 0.410" #54-202
0.250" 0.177" 48" 0.312" 0.422" 0.410" #53-045

Ressources Techniques

Filter

How to Achieve Optimal Collimation with Fiber Optics

Collimated light is required for many fiber optic applications. Using the proper setup, fiber optic collimating lenses or ball lenses, and some optical know-how, you can achieve optimal collimation.

View Now

What are the advantages of Fiber Optic Illumination?

What is the difference between flexible, quartz and liquid fiber optic light guides?

What diameter beam will a light guide output?

Why do fiber optic light guides lose so much energy?

How do fiber optic light guides connect to fiber optic illuminators?

Guide de lumière annulaire

Illumination Spot Size Calculator

What diameter beam will an optical fiber output?

What is the numerical aperture of a fiber?

Why do optical fibers lose so much energy?

What is the attenuation curve and how do I use it?

What is the difference between a jacketed and an unjacketed optical fiber?

What is the difference between single-mode and multimode fiber?

What is "cross-talk" and how can I eliminate it?

How do I cut and polish glass and plastic fibers?

Will optical fibers allow light to escape from the sides, like a neon sign?

What is the difference between coherent and incoherent fibers?

What does bend radius (or minimum radius of bend) mean?

I’m looking for the best way to maximize the amount of light from an LED into a fiber optic. What are the best options for coupling my LED and fiber?

My application calls for inexpensive, straight fiber bundles but the ones that you sell are bent. Is it possible to buy straight ones?

Rayon de courbure

Matériau tampon

Gaine optique

Décibel (dB)

Revêtement secondaire de fibre optique

Fiberscope

Fibre optique

Fraction d'emballage

Types d'éclairage courants

Vous hésitez sur le type d'éclairage à utiliser pour votre système ? Découvrez les avantages et les inconvénients des différents types d'éclairage chez EO.

View Now

Utilisation d'un éclairage structuré

L’éclairage est un élément essentiel dans tout système de vision, et peut souvent faire la différence entre un bon système d’imagerie et un d’excellente qualité.

View Now

Spectrolight Mighty Light Product Overview

The Mighty Light is a self-contained, low-noise, tunable source of broadband visible and NIR light featuring a tungsten halogen lamp and output power up to 2W

View Now

Spectrolight Flexible Wavelength Selector Basic Product Overview

Learn how to use a Spectrolight Flexible Wavelength Selector Basic to manually tune the emitted wavelength range of a Spectrolight Mighty Light Illuminator

View Now

Spectrolight Flexible Wavelength Selector Auto Product Overview

Learn how to use a Spectrolight Flexible Wavelength Selector Auto to automatically tune the emitted wavelength range of a Spectrolight Mighty Light Illuminator

View Now

What is ripple in illuminators and how does it affect my video system?

What is the advantage of high frequency illumination?

What are the advantages of LED Illumination?

Candela

Température de couleur

Éclairage diffus

Éclairage directionnel

Éclairage brillant

Flux lumineux

Lux

Fiber Coupler Calculator

Éclairage en silhouette dans la vision industrielle

Rétroéclairage adapté > mesure précise et détection des bords > en savoir plus chez Edmund Optics !

View Now

How do I couple light into a fiber using a lens / ball lens?

How can I decrease the output angle of a fiber to achieve a more collimated beam with a lens / ball lens?

Does light entering a multimode fiber undergo a polarization change during propagation through the fiber? If so, can the emerging light be linearly polarized by placing a polarizer at the fiber’s output end?

Why is it necessary to collimate the laser diode before fiber-coupling?

Angle d’acceptance

Techniques de Polarisation à Succés

Are you looking for a solution to common imaging problems? Discover different polarization techniques to improve your image at Edmund Optics.

View Now

Spectrolight Mighty Light Accessories Overview

Modular accessories adapt the Spectrolight Mighty Light Illuminator for tuning to a specific wavelength, fiber coupling, collimating, homogenizing, and more

View Now

Best Practice #4 Light Up Your Life

Join Nick Sischka, Vision Solutions Specialist and member of EO's Imaging Team, as he reviews some best practices to consider when designing an imaging system

View Now

I am looking to prototype an illumination system. My objective is to use a small halogen filament bulb and end up with a beam of light. What would be the best lens or lens combination to give me this projected spot of light?

Do you have C-Mount components to make an in-line illumination assembly?

Éclairage axial

Angle d'ouverture

Densité de puissance

Réflexion interne totale (TIR)

Éclairage en ligne

Utiliser un éclairage en ligne dans un système optique ? Edmund Optics compare les éclairages et explique le bon moment pour l'utilisation en ligne.

View Now

Edmund Optics Imaging Lab 3.2: The W of Illumination Geometry

Learn how to specify imaging system components.

View Now

Edmund Optics Imaging Lab 3.3: Directional Illumination

Learn how to specify imaging system components.

View Now

Edmund Optics Imaging Lab 3.4: Directional Illumination of Ring Lights

Learn how to specify imaging system components.

View Now

Edmund Optics Imaging Lab 3.5: Backlights

Learn how to specify imaging system components.

View Now

Edmund Optics Imaging Lab 3.6: Dome Lights

Learn how to specify imaging system components.

View Now

Edmund Optics Imaging Lab 3.7: Line Lights

Learn how to specify imaging system components.

View Now

Best Practice #5 Color Matters

Join Nick Sischka, Vision Solutions Specialist and member of EO's Imaging Team, as he reviews some best practices to consider when designing an imaging system.

View Now

Illumination: The Third Pillar of Imaging System Design

Understanding unique machine vision illumination methods

Can I use an illuminator alone to affect the spectral contrast of my image?

Capteur monochrome

Understanding Collimation to Determine Optical Lens Focal Length

Collimated light occurs when light rays travel parallel to each other.

View Now

Éclairage à fond noir

Ouverture numérique (NA)

Edmund Optics Imaging Lab Module 3: Illumination Overview

Learn how to specify imaging system components.

View Now

Labo d’imagerie EO 3.1 : Introduction aux concepts d'éclairage

Apprenez à spécifier les composants d'un système d'imagerie.

View Now

Éclairage à fond clair

 
Ventes & Conseil d’Experts
1-800-363-1992
ou consulter les numéros d’autres pays
OUTIL DE DEVIS
facile à utiliser
entrer les numéros de stock pour commencer